SBE products

Copyright © 2002 by SBE, Inc. All rights reserved.

Detailed information about SBE's entire product line, organized by card type:
PCI, CompactPCI, PMC/PTMC, and VME. 

-- illustrations of SBE processors and WAN adapter cards in application, providing high-performance, cost efficient solutions

-- technical support policy
-- how to contact technical support & customer service
-- product manuals, tech notes, whitepapers
-- software drivers  

--how to contact a SBE customer service and sales    representative to discuss your needs
--order and purchase information

-- SBE management, partners, & investor information
-- corporate locations, directions, & contact information

-- SBE press releases, articles, and whitepapers
-- upcoming company events

-- current job listings & how to apply
-- benefit options

how to find your way around this site 

PCI multiport T1/E1/J1 controller with H.100 CT Bus, Ethernet and intelligent protocol processing for high density SS7 and LAPD
 

The wanADAPT-1SSI provides high-performance, yet cost-effective WAN connectivity.
 

CompactPCI 6U Octal T1/E1/J1, front-panel I/O controller with H.110 CT Bus, Ethernet and intelligent protocol processing for high density SS7 and LAPD.
 

Intelligent PCI core processor platform with a PMC module site for addressing a wide range of I/O and protocol processing applications
 

The wanADAPT-1HSSI is an industry standard PCI card that provides a high performance WAN connection using High Speed Serial Interface (HSSI).
 

CompactPCI 6U Octal T1/E1/J1, rear-panel I/O controller with H.110 CT Bus, Ethernet and intelligent protocol processing for high density SS7 and LAPD.
 

The wanADAPT-1T3 provides full T3 WAN connectivity by terminating a DS3 circuit at the adapter card itself
 

The wanADAPT-1TE1 provides HDLC functions in hardware; reduced component count and power levels increase reliability; low latency design passes data to applications quickly
 

Advanced CompactPCI 6U core processor with dual PTMC module sites, dual Ethernet, Packet Switched Backplane and H.110 CT-Bus interfaces.
 

The wanPMC-1SSI adapter provides a flexible synchronous interface for a wide range of electrical interfaces.
 

A channelized T1/E1/J1 PCI mezzanine card for four ports, which include integrated CSU/ DSU
 

The VLAN-E3 is an intelligent Ethernet communications controller for interfacing VME systems to IEEE 802.3 LANs.
 

The wanPMC-2SSI adapter lets routers, switches or servers support WAN connections on the broadest array of medium speed lines
 

The wanPMC-2T3E3 is a dual channel DS3/E3 PMC adapter for use on PCI, CompactPCI and VME carrier platforms.
 

The VCOM-8A is an intelligent, low cost, 8-port, VME serial I/O controller for asynchronous applications.
 

The wanPMC-1HSSI is a PMC module that provides a high performance WAN connection using High Speed Serial Interface (HSSI).
 

A CT-Bus enabled PTMC module with four channelized T1/E1/J1 interfaces and a 128 channel syncronous communications controller.
 

The VCOM-54 is a high speed VMEbus serial controller that provides four or eight ports of T1 and E1 rate serial communications.
 

The wanPMC-1T3 provides full T3 WAN connectivity by terminating a DS3 circuit at the PMC Module itself
 

A CT-Bus enabled PTMC module with a channelized T3 interface and a 256 channel syncronous communications controller.
 

The HighWire 400 SDK provides a solid base for creating unique telecommunications solutions, faster and more cost-effectively than ever before.
 

The HW400p/M Developers Kit for VxWorks RTOS (DKV) combines SBE's HW400p/M PCI core processor with a software board support package tailored to developers who build embedded communications solutions using VxWorks RTOS.
 

The HighWire-MTP2 for SDK software module is an MTP2 protocol for the target HW400 system running under the VxWorks operating system.

The HighWire-MTP2 for Solaris software package is an MTP2 protocol for the HW400 on the Sun Solaris 2.6 and 8 operating systems.
 

LinkWARE LAPD/B provides a complete LAPD/B datalink solution that allows integrators to focus on adding value at the upper protocol and application layers.
 

The HW400p/M DKL developers kit for Linux combines the HighWire 400p/M modular core processing platform with a TimeSys Linux GPL Software Developers Kit (SDK), to provide a core processing platform that reduces product development time for developers who build embedded communications solutions with Linux.
 

LinkWARE MTP2 is a carrier-class foundation for cost-effective SS7 applications and systems.